SUITABLE FOR BELT DIMENSIONS 40 X 780 MM
TOPRAIL 1100 HT
Pipe Belt Sander
Extremely compact and powerful pipe belt sander for easy and
fatigue-free sanding, satin finishing or polishing of round
pipes. During use, the machine is resiliently placed on the round
tube from above, which enables fatigue-free work for hours, as
the weight of the machine rests on the work-piece. Thanks to the
high-performance motor with planetary gear, a triple torque is
generated compared to grinders of a similar design.
The TOPRAIL 1100 HT is therefore ideally suited for continuous
use, and that with low weight and very compact dimensions.
All functional parts are made of high-quality, milled aluminum,
wear-resistant drive and deflection rollers (with lateral belt
guide). As a result, high precision and a perfect end result.
Benefits at a glance
Particularly easy belt change in seconds.
• Stainless steel protective covers.
• Ideal for working in tight grinding areas – the handle can be
adjusted accordingly.
• Extremely compact, powerful and high-torque thanks to the
exclusive planetary gear (high torque) with high pulling
power – up to three times higher than comparable devices.
• Fatigue-free, easily controllable belt guide.
• “Marathon-Engine” offers 30% higher power reserves with
up to 50% more torque compared to comparable devices.
• Motor with multiple dust protection for a long service life.
• Electronic overload protection, soft start and restart
protection.
• Switch-off carbon brushes to protect the motor.
• Maintenance-friendly device design – for carbon brush
replacement in seconds.
• The machine can be put down without touching the table in
the standing position.
• Made in Germany.
Contents:
1 TOPRAIL 1100 HT pipe belt sander
1 Robust, impact-resistant plastic case
1 Particulate matter protection cap
3 Zircon belts
1 SC fleece belt
Product information "TOPRAIL 1100 HT pipe belt sander"
Extremely compact and powerful pipe belt sander for easy and fatigue-free sanding, satin finishing or polishing of round pipes.
During use, the machine is "placed" on the round tube from above, which enables fatigue-free work for hours , as the weight of the machine rests on the workpiece.
Thanks to the high-performance motor with planetary gear , 3 times the torque is generated compared to grinders of a similar design. Thus, the TOPRAIL 1100 HT is ideally suited for continuous use , and that with low weight and very compact dimensions.
All functional parts consist of high-quality, milled aluminum, wear-resistant drive and deflection rollers (with lateral belt guide). This means high precision and a perfect end result.
Features:
-
Particularly easy belt change in seconds.
-
Mudguards made of stainless steel.
-
Ideal for working on tight grinding areas - the handle can be adjusted accordingly.
-
Ideal for pipe diameters Ø 25 - 70 mm. Max. tube diameter Ø 130 mm.
-
Extremely compact, powerful and high-torque thanks to the exclusive planetary gear (high torque) with high torque - up to three times higher than comparable devices.
-
Fatigue-free, easily controllable tape guide.
-
"Marathon-Motor" offers 30% higher power reserves with up to 50% more torque compared to comparable devices.
-
Motor multiple dust protection for a long service life.
-
Electronic overload protection, soft start and restart protection.
-
Switch-off carbon brushes to protect the motor.
-
Maintenance-friendly device design - for carbon brush replacement in seconds.
-
The machine can be put down in the standing position without touching the table.
-
Set content:
1 TOPRAIL 1100 HT pipe belt sander
1 Robust, impact-resistant plastic case
1 fine dust protection cap
3 zircon belts 40 x 780 mm
1 SC fleece belt 40 x 780 mm
-
|
Device type:
|
Belt grinder
|
|
Cable / Battery:
|
cable
|
|
Suitable tools:
|
Belts
|
|
Plug type / mains connection:
|
EU (C+F) 220 - 240 volts ~ 50 - 60 Hz, GB (G) 110 - 120 volts ~ 50 - 60 Hz
|
|
Max. tool dimension:
|
Belts 40 x 780 mm
|
|
Tool mount:
|
Belts 40 x 780 mm
|
|
Power consumption:
|
1100 watts
|
|
WEEE-Reg.-No.:
|
DE 51395731
|
