Bevelling system UZ 50 Triumph is another of the series of unique solutions developed N.KO Machines. Basically, three beveling
systems are combined in a single machine. UZ50 Triumph can be used as a mobile beveller, which moves along the beveled
material at the speed up to 1.2m/min, 3.93 ft/min. The range of the beveling angle is 15°-50°. In addition it is possible to fl ip the
entire machining unit upside down and create bevels for X and K form of the welds without handling machined material. This
application is made possible by the rotary mechanism of the 3D manipulator, which is a standard machine equipment. Finally,
the machine can be rebuilt for a stationary beveller with a special equipment UZP 30. This mode is intended for processing
smaller parts with a minimum length of the bevel edge 200mm, 8.19 in.
Adjustable cutting conditions enable the UZ50 to machine otherwise diffi cult materials like stainless steel, Hardox (armoured
steel), Weldox and Domex on top of mild carbon steel.
3D manipulator allows to adapt UZ50 for any unevenness or deformations in the length of machined material. It also allows to
work on uneven fl oor.
If needed it is possible to disconnect the UZ50 from the manipulator completely due to the quick-connect function within few
seconds and use the UZ50 separately.
Automatic feed with continuous adjustment of the feed rate in the range of 0 - 1,2 m/min. / 0 - 3.93 ft/min.
High speed milling tool equipped with cutting inserts with extended life.
The variable adjustment of the desired angle in the range 15°-60 ° without having to replace any parts.
All electronic equipment is closed in the dust-tight cabinet with increased vibration resistance.
The machine is equipped with the most modern safety features.
The possibility to buy ASP – active smart protection.
The machine cuts problematic materials - e.g., stainless steel, Hardox, Weldox a Domex
Technical data:
Max. bevel width: 62 mm / 2.44 in
Adjusting the bevel angle: 15° - 60° (continuous)
Material thickness: 7 to 80 mm / 0.27 to 3.15 in
Motor of cutting head: 4000 W
Feed speed: 0 - 1,2 m/min. / 0 - 3.93 ft/min.
Weight: 175 kg / 385.8 lb
Dimensions: 1010 x 745 x 1326 mm
39.76 x 29.33 x 52.2 in
Number of cutting inserts 5 pcs
Included in the price:
Bevelling system UZ50 TRIUMPH
Tools for an operator.
Packet in a wooden crate.
User manual.
